Looking for:
Using Source Program Monitors in Premiere Pro
Details see Privacy Policy. All categories. Jump to Comment Section. Software Update. Adobe Premiere Pro Share this article. Filter: all all Most reacted comment Hottest comment thread. Sort by: latest latest Oldest Most Voted. Load More Comments. Support CineD. Latest Reviews. Monitor Review Sponsored. Lens Review. SIGMA mm f2. Filter Review. Accessory Review. Latest News. Adobe Premiere Pro and After Effects Drone News. Jeff Loch Jeff Loch is a French freelance director, editor and colorist, working mostly on music videos, commercials, and corporate films.
Take part in the CineD community experience. Settings button F. Button editor. By default, the most useful buttons are displayed along the bottom of the Source and Program Monitors.
However, you can add more. Add buttons to the button bar by dragging them from the button editor. Up to two rows of buttons can be added. Spaces to separate groups of buttons can also be dragged to the button bar. To remove a button, drag it away from the button bar. To turn off all buttons, go to the panel menu and deselect “Show Transport Controls. Some formats are difficult to display in full-motion playback, due to their high compression or high data rate.
A lower resolution permits faster motion playback, but at the expense of display image quality. Below full resolution, these formats have error correction turned off, and artifacts are common during playback. These artifacts, however, do not show up in exported media.
Providing separate playback and pause resolutions gives you more control over your monitoring experience. These settings allow you to check the quality of focus or edge details when playback is paused. Scrubbing puts the monitor in playback resolution, not pause resolution. Not all resolutions are available for all sequence types. For sequences with frame sizes larger than , such as RED, more fractional resolutions are available.
If your previews are rendered at a resolution below the sequence resolution, the playback resolution is actually a fraction of the preview resolution.
The Source Monitor and Program Monitor scale video to fit into the available area. You can increase the magnification setting for each view to see the video in more detail. You can also decrease the magnification setting to see more of the pasteboard area around the image to adjust motion effects more easily, for example.
Choose a magnification setting from the Select Zoom Level menu to the right of the current time display in the Source Monitor or Program Monitor.
In the Source Monitor , percentage values refer to the size of the source media. In the Program Monitor , percentage values refer to the image size specified by the sequence settings. Both the Source and the Program Monitor can display an icon resembling a “Stop Light” that indicates whether frames are being dropped during playback.
The light starts at green and changes to yellow when dropped frames occur and resets on each playback. A tool tip indicates the dropped frame count. Frames can have a slightly softer look during playback versus pause at the default settings, even when both are set to full resolution.
However, turning High-Quality Playback on can decrease playback performance, including causing dropped frames. Composite Video. Displays transparency as a grayscale image. If your footage has an alpha channel, this setting shows the image as a grayscale alpha matte with the dark areas being transparent. Displays the footage of all cameras simultaneously. You can switch between cameras to choose footage for the final sequence.
When video clips have VR properties associated with them, this option is enabled. Using VR Video display, you can simulate different viewing experiences with your equirectangular video, for example, using a VR headset such as the Oculus Rift or on a desktop through YouTube or Facebook. Comparison View. Split Program Monitor display that is useful for tasks such as matching colors between two shots or adjusting the intensity of an applied effect. To use the waveform monitor and vectorscope displays, right-click the Lumetri Scopes window and select any of the waveform or vectorscope options.
For more information, see View Lumetri Scopes. The Gang functionality is a handy feature since it lets you see how a source clip compares to your sequence, and it is ideal for tasks like matching the look of one piece of footage with another.
The Gang Source and Program button can be powerful for workflows like color correction, Multi-cam editing, or when comparing edits. Click the button to toggle the gang functionality on and off.
When it is enabled, the play heads are locked together and move in tandem. When it is off, the monitors function independently from one another. To gang the Source Monitor and Program Monitor :. Guides in the Program Monitor help you align text, graphic objects, videos, and still image clips. You can also save guides as templates for re-use, or to share with others.
Right-click the ruler to toggle between pixel and percentage measurement options. Drag the object to the desired location. When the pointer comes within 2 pixels of a guide, it snaps to the guide. The guide template is saved as a. Click the guide template, and type the new name. Click the guide template and click Delete. You can share guides with your teammates if you have specific settings for action safe and title safe editing spaces. To import a guide: Click Import and navigate to a saved guide file to import it into Premiere Pro.
To export a guide: Select a guide template and click Export to save the file to your system. You can compare changes to clips by turning on the Comparison View in the Program Monitor. You can view the changes to the clip side-by-side, horizontally, or vertically by selecting the display options shown below. By default, the side-by-side view is displayed with the reference frame or the Before frame on the left, and the current frame or the After frame on the right.
However, you can swap their position by clicking the Swap Sides icon on the left of the Program Monitor. If you use the vertical or horizontal split modes, you can drag the blue splitter across the image to do an onion-skinning comparison of the two shots. The Shot comparison mode allows you to compare different shots. This workflow is particularly useful for color matching.
To select the current frame: Park the playhead over a frame with the clip selected for it to appear as the current frame.
To select the reference frame: By default, the reference frame is the first frame of the entire sequence. However, you can click on the navigation icons in the reference frame to a previous or next edit point. You can also scrub to a different reference frame using the scrubbable timecode. Once selected, Premiere Pro remembers that reference frame throughout the editing session until you select a different frame.
To view and edit source clips listed in the Project panel or individual clip instances in a sequence, open the clips in the Source Monitor.
The Source menu, accessed from the Source Monitor tab, lists open clips. You can also close all clips and the Source Monitor itself by clicking the Close button in the Source Monitor tab. You can set keyboard shortcuts for navigating multiple clips loaded into the Source Monitor.
Keyboard shortcuts can speed toggling of clips, skipping to the first or last clip, or closing one or all the clips in the Source Monitor pop-up menu. In the dialog box, click the triangle next to Panels , and then click the triangle next to Source Monitor Panel to reveal the keyboard shortcuts for that panel. The Source Monitor has several controls for moving through time or frames in a clip. The Program Monitor contains similar controls for moving through a sequence. Current time display B.
Playhead C. Zoom scroll bar D. Time Ruler E. Duration display. Display the duration of a clip in the Source Monitor and sequence in the Program Monitor. Tick marks measure time using the video display format specified in the Project Settings dialog box. You can toggle the time rulers to display timecode in other formats. You can adjust the playhead, markers, and the In and Out points by dragging their icons in a time ruler. Time ruler numbers are off by default. You can turn on the time ruler numbers by selecting Time Ruler Numbers in the panel menu of the Source or Program Monitors.
Current time displays. Show the timecode for the current frame. The Source Monitor shows the current time for the open clip.
To move to a different time. Alternatively, click in the display and enter a new time, or place the pointer over the time display and drag left or right. To toggle display between full timecode and a frame count, Ctrl-click Windows or Command-click Mac OS the current time in either monitor or a Timeline panel. Show the duration of the open clip or sequence. The duration is the time difference between the In point and the Out point for the clip or sequence. When no In point is set, the starting time of the clip or of the sequence is substituted.
When no Out point is set, the Source Monitor uses the ending time of the clip to calculate duration. The Program Monitor uses the ending time of the last clip in the sequence to calculate duration. Zoom scroll bars. Zoom scroll bars correspond with the visible area of the time ruler in each monitor. You can drag the handles to change the width of the bar and change the scale of the time ruler below. Expanding the bar to its maximum width reveals the entire duration of the time ruler.
Contracting the bar zooms in for a more detailed view of the ruler. Expanding and contracting the bar is centered on the playhead. By positioning the mouse over the bar, you can use the mouse wheel to contract and expand the bar. You can also scroll the mouse wheel in the areas outside the bars for the same expanding and contracting behavior. By dragging the center of the bar, you can scroll the visible part of a time ruler without changing its scale.
Using and customizing workspaces – Top Features of Adobe Premiere Pro CC 2021
Both the Source and the Program Monitor can display an icon resembling a “Stop Light” that indicates whether frames are being dropped during playback. Then here’s our recommendation. Read wehel Best microphones opens in new tab for vlogging and filmmaking The best audio recorders opens in new tab for video production Premjere best video editing monitors opens in new tab The best photo editing tools opens in new tab and accessories opens in new tab The best headphones adobe premiere pro cc jog wheel free download video editing посетить страницу in new tab The best headsets opens in new tab What to look for when choosing a monitor opens in new tab The best mouse for editing video and photos opens in new tab Best USB-C monitors for photo editing opens in new tab Everything photographers qdobe to work from home opens in new tab Best webcam for home working opens in new tab. Legal Notices Online Privacy Policy.